Shanghai Guoding Technology

   The DC current or voltage signal of the field device through the isolated transmission output DC current or voltage signal to a control system or other units combined instrument.Signal isolation can effectively eliminate to backflow, to solve the industrial field interference and signal transmission and matching.

 One input, one output. One input, two-channel isolated output. The isolator uses a separate DC power supply, power supply - Input - output isolation between. Standard 35mmDIN rail card installed. The isolator can be combined with the unit instrument and DCS, PLC and other systems used in conjunction.

   The DC current or voltage signal of the field device through the isolated transmission output DC current or voltage signal to a control system or other units combined instrument.Signal isolation can effectively eliminate to backflow, to solve the industrial field interference and signal transmission and matching.

 One input, two outputs, a DC signal isolator. One input, two-channel isolated output. The isolator uses a separate DC power supply, power supply - Input - output isolation between. Standard 35mmDIN rail card installed. The isolator can be combined with the unit instrument and DCS, PLC and other systems used in conjunction.

   DP101 Intelligent Digital echo power meter using two-wire system, no external power supply, connected in series 4 ~ 20mA loop, indicates not only the 4 ~ 20mA current loop value, but also shows the setting temperature, pressure and other analog value range.

Show header imported dedicated circuit using SMT process. The header size dimensions can be used in conjunction with a variety of field instrumentation to improve field instruments grade, especially the temperature and pressure transmitter.

Show header no potentiometer adjustment, such as components. Changing the range just press two buttons on their own and easy to use. This version is V1.01 upgrade version, additional automatic temperature compensation.

   General TT201 temperature transmitters are an integrated temperature transmitter, supporting use the industrial RTD or thermocouple. It can be convert the field thermal resistance (RTD) or thermocouple (TC) signal into a linear with temperature 4-20mA current output through the digital linearization. Transmitter has a sensor break alarm. When thermocouple input, it has automatic cold junction compensation function, using special software to set and calibration the temperature Through the PC or special handheld digital communication, the temperature transmitter is configured, set and calibrated.

        The transmitter can be installed directly on the junction box of thermal resistance (RTD)  and the thermocouple, with the formation of an integrated structure. Thermometer as a new generation can be widely used in metallurgy, petroleum, chemical, power, light industry, textile, food, defense and scientific research industries.